How do You Make a Folded Palm Branch Into a Cross?

Create a Cross from Palm BranchesTo make the knot in the middle1. Hold the Palm horizontally.2. At about the half way point fold the palm up towards the ceiling to create a ninety degree angle.3. Take this piece and fold it tightly down towards the floor. (Do not try to make the cross. At this point you are making the square in the middle.)4. Still using the same piece of palm, fold it back up towards the ceiling.5. Take the other piece of the palm and fold it across the square you have been creating.6. You will now take this same piece of palm and thread it through the small square you have created. This square is at the back of the cross and you will see the right angle you originally created in this square – thread the palm under this right angle piece.7. Pull tightly and you should have a completed know that does not need to be held. To Form the Cross1. Take the palm that points towards the ceiling and fold it down toward the floor and thread it through the square you have created at the front of the cross. This will be the top of your cross.2. Still using the same piece of palm thread back up through the same square you used in the previous step to create the bottom of the cross.3. Turn the half made cross around so that the remaining horizontal piece of palm is to the right. You should have a vertical square in front of you and a horizontal piece of palm to your right. Take the unwoven piece of palm and thread it through this square to create one side of the cross.4. Take the same piece of palm and thread it through the same square you used in the previous step making certain to thread it behind where you had previously threaded. You should have a cross that still has some palm pieces hanging out either on top and sometimes in the sides of the cross.5. Cut the strands that do not belong in your cross. You have created your palm cross. Congratulations!